The Apron: A Step-by-Step Guide

Friday, July 23, 2010


What you'll need:
 * 1/2 yard of lining fabric
* 1 yard of face fabric
* Coordinating thread
* Scissors
* Measuring tape
* Straight pins
*Pencil or water-soluble pen
* Sewing machine
* Iron


Taking Measurements

Apron Panel Width
1) Measure the width of your hips. If you're wearing pants or a skirt you can use the side seams of the garment as a guide
2) Add 5 inches to this measurement to account for tucks and seam allowance. This measurement will become the width of the apron panel.
3) Divide this number in half to use for drafting the apron panel. We will call this half-width.

Apron Panel Length
1) Decide on the length of the apron panel. Measure from the waist down to the desired length.
2) Add 1 inch to account for seam allowance.

Apron Tie
1) Measure around your waist.
2) Add 32 inches to this length to account for a bow



Cutting the Apron Panels and Apron Tie
  
Drafting the Apron Panel Pattern onto the Lining Fabric:
1) Fold fabric in half a little more than the half-width of the apron panel.
2) Using the tape measure and pin, measure down the fold of the fabric to the apron panel length and make a small mark.


3) At this mark, measure across the width of the fabric, making a mark at the half-width.
4) Connect the two points together with a straight line.
5) From the end of this line draw a perpendicular line measuring the apron panel length.
6) The measurements and lines will form a rectangular shape.
7) To make the curved edge, use a cup or plate as a guide to draw the curve.


Cutting the Apron Panel from the Lining Fabric:
1) Cut out apron Panel along the guide lines that you have drawn.


Cutting the Apron Panel from Face Fabric
1) Fold face fabric to appropriate width.
2) Pin previously cut lining fabric on top, lining up the folded edges.
3) Cut out.


Cutting the Apron Tie
1) Cut apron tie 5 inches wide, using the calculated length.
**If your fabric is not long enough to accommodate the tie length, simply cut enough piece to add up to the calculated length.  Sew these pieces together to create one tie.**
 

After the previous steps, you should have cut 1 apron panel from the face fabric, 1 apron panel from the lining fabric, and 1 apron tie.



Sewing the Apron Panel

Joining Apron Panels:
1) Place apron panels on top of each other, right sides together.
2) Pin in place.
3) Starting in the right hand corner, sew down and around the curved edges.  End in the left hand corner, leaving the top straight edge of the piece un-sewn.


Notching Apron Panel:
1) Notch apron panel curves by cutting triangles into the seam allowance. This will make it easier when turning the piece right side out.
**Be careful not to cut into the sewn seam**


Turning Apron Panel:
1) Turn apron right side out.
2) Push the corners out so that they lay flat and smooth.
3) Iron entire panel flat.


Top Stitch Apron Panel:
1) Top stitch around all edges of the apron panel 1/8 inch from the edge.
** Top stitch the opening as well in preparation for the tucks**



Adding Tucks to the Apron Panel

Measuring Tuck Placement:
1) Measure 3 inches in frorm the side and place a pin.
2) From that mark measure 1 1/2 inches in and place a pin.
3) Continue this process until you have 3 to 4 pins in place. These pins will determine the placement of the tucks.
4) Repeat these steps on the other side of the apron.


Forming the Tucks:
1) Taking one at a time, fold the apron panel in half (face fabric together) where the pin in placed.
2) Pin this fold together
3) Sew next to this fold 1/4 inch from the fold.  Sew 1 1/2 inches down and backstitch.
4) Repeat these steps until all pin markers have been formed into tucks.


Ironing the Tucks:
1) Iron all tucks in one direction so that the folded edges of the tucks face inward.




Sewing the Apron Tie

Ironing the Apron Tie:
1) Iron the raw edges of the apron tie in 1/2 inch.
2) Iron the ends of the apron tie in 1/2 inch.



 3) Fold apron tie in half, matching up the folded edges and iron flat.


Attaching Apron Tie to Apron Panel:
1) Lay out the apron tie and open it so that the pressed in seam allowance in exsposed.
2) Line up the raw edge of the apron panel with the raw edge of the apron tie seam allowance.
3) Fold the apron tie back over so that the fold lines meet up.
4) Pin in place.


Top Stitch Apron Tie:
1) Now that everything is pinned together, top stitch the entire apron tie.
2) Start on the apron tie side where the folded edges meet. Sew 1/8 inch from the edge.


Finishing Touches:
1) Iron one last time and then bake some cookies!!!



Happy Sewing!
-Katie






1 comment:

ShareThis

Proudly designed by Mlekoshi playground